Thinkware Hardwiring cable (10 Ft.). 【HARDWIRING CABLE】Connects the main dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended)【PARKING MODE】Enables Parking Surveillance mode with impact and motion detection when the car is parked【AUTOMATIC SHUTOFF】Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected【CABLE LENGTH】Connecting cable is 9.8 feet (2.98 meters) long【COMPATIBILITY】Hardwiring cable is compatible with all THINKWARE dash cams (except F550) Around-the-clock Surveillance for Your CarThe Thinkware Hardwiring cable enables the Intelligent Parking Surveillance feature, which captures all events surrounding your vehicle while it is parked. Available in all Thinkware Dash Cams, hit-and-run and vandalism attempts will be captured which can be used for insurance purposes.Advanced MonitoringThe hardwiring installation allows the dash cam to automatically switch to parking mode when the ignition is off. Operating at low power consumption levels, the dash cam constantly monitors for motion and impact events.Record Much LongerPowered by your vehicle’s battery, Thinkware Dash Cams record for much longer than conventional dash cams equipped with rechargeable batteries, which is often hindered by the lackluster performance and short operation time. With your Thinkware dash cam hardwired, it can stay recording for much longer durations (up to 48 hours), and can be set to shut down automatically if the dash cam detects low voltage from the vehicle battery to prevent drainage.